Back to dashboard
Sections menu

Lockheed Martin C-130J Super Hercules · Troubleshooting

Warnings & faults

Tap a warning light or message to see what it means, what usually causes it, what the pilot does and what the mechanic checks.

Unverified — check your manualText on this page is written from general knowledge. Figures marked ✓ are checked against official FAA/EASA data.See verified data
cautionATA 24 Electrical Power

GEN 1(2,3,4) FAIL

Engine-driven generator has tripped offline.

CAUTION — action needed, but not at once. Amber level: deal with it when the aircraft is under control and on a safe path.

Where it is

Location of Electrical
Electrical

What it looks like

Generator control units and circuit breaker panels
Generator control units and circuit breaker panels · illustrative image

How to recognise it

  • ACAWS Message: 'GEN 1(2,3,4) FAIL' on the HDD (Heads-Down Display) and HUD.
  • Master Caution (Amber) illuminated; single beep alert.
  • System status change on the dedicated MFD system page (e.g., Fuel, Engine, Hyd).
  • HUD alert banner at the top of the display.

How to manage it

Recognition

  1. 1.ACAWS Message: 'GEN 1(2,3,4) FAIL' on the HDD (Heads-Down Display) and HUD.
  2. 2.Master Caution (Amber) illuminated; single beep alert.
  3. 3.System status change on the dedicated MFD system page (e.g., Fuel, Engine, Hyd).
  4. 4.HUD alert banner at the top of the display.

Technique (ACAWS)

  1. 1.Identify: Read the ACAWS message aloud to the crew.
  2. 2.Cancel: Press the Master Warning/Caution button to silence the tone.
  3. 3.Verify: Cross-check the message with primary engine/system instruments.
  4. 4.Execute: Perform memory items if required, then follow the Electronic Checklist (ECL).

Likely causes

  • Generator drive failure
  • Control unit (GCU) fault
  • Engine shutdown

Know the system

  • Four 60/90 KVA engine-driven generators and one APU generator; the system is highly redundant but a total loss requires APU or battery power.
  • Essential DC is powered by the battery if all generators fail.

Crew technique

  • Pilot Flying (PF) maintains aircraft control and follows HUD alerts; Pilot Monitoring (PM) manages ACAWS and the ECL.
  • Loadmaster (LM) provides visual confirmation of cargo/ramp/door status and monitors engine/nacelle for external signs of fire or smoke.
  • Brief the crew on the selected landing category and any changes to the mission profile.

Don't

  • Do not rush — wrong switches in a hurry cause more accidents than the original fault.
  • Do not ignore it — cautions often come before bigger problems.
  • Do not reset circuit breakers in flight unless the procedure says so.

After landing — maintenance

  • GCU fault codes
  • Generator feeder cable inspection
  • Drive shaft check
  • Write the fault in the aircraft technical log with time, phase of flight and indications.
  • Maintenance checks the aircraft and downloads data (FADEC/Mission Computer) before the next flight.

REF: C-130J Flight Manual - Electrical

EDUCATIONAL USE ONLY. Content is summarised from manufacturer documentation for learning. It is not approved flight or maintenance data. Always use the current, aircraft-specific POH/AFM, FCOM, QRH, AMM and operator procedures.